Wall, Floor & Overhead Door Stops
Commercial Door Stops & Holders Installed for DMV Buildings
Protect walls, glass, and hinges from doors that swing too far.
Written price before work Available 24/7
Look behind most busy office doors, and there’s a dent or a hole in the drywall right where the lever lands. Exterior doors take worse hits, since wind can swing them past their range until the closer arm bends or the hinges pull loose. Rubber wedges and kick-down holders end up doing the job, yet on a fire door they keep it from closing during a fire. With DMV Commercial Door Repair, each opening gets the stop it actually needs, from wall bumpers and floor stops to overhead stops and door holders. Walls stay clean, hinges stay tight, and doors stop swinging farther than they should.
Free On-Site Estimates
100% Satisfaction Guaranteed
24/7 Emergency Calls
Wall to Overhead Stops Installed
Parts you can trust
Trusted Commercial Door Stop Brands Our Team Installs
Every door we fix gets parts from makers that commercial buildings already rely on.
What we fix
Commercial Door Stops Placed Where They Actually Stop the Damage
A stick-on bumper pressed to the drywall looks like the easy answer. Hollow walls give way after a few hard swings, though, and a floor stop set too far from the wall becomes a trip hazard or scrapes the door sweep. Our team at DMV Commercial Door Repair checks what sits behind each door, how far it needs to open, and whether wind or carts hit it hardest. That check decides between a wall stop, a floor stop, an overhead stop, or a holder that keeps the door open when staff needs it. Commercial door stops placed this way keep levers off the wall and doors inside a safe swing.
Take care of the entrance
Replace Door Wedges With Safe Magnetic Holders
Fire Code Bans Wedges on Rated Doors. Book Your Correction This Week.
A closer look. A clear price.
What Happens During Your Free Door Stop Estimate
A technician opens each door the way staff and wind do, then plans stops around whatever gets hit.
Know what needs fixing.
Before you decide.
Before you decide.
Swing Test
Each door gets pushed to its full open position to see where the lever, edge, or glass makes contact.
Wall and Floor Check
Hollow drywall, tile, and carpet each call for a different anchor. The estimate notes which one sits behind every door.
Stop Plan
Each door gets a recommended stop type based on what’s behind it and how it gets used.
Installed with care
How We Decide Where Each Stop Goes
A stop in the wrong spot can cause its own damage. Every install follows a few placement rules to avoid that.
Secure from outside.
Ready from inside.
Backing Behind Wall Stops
Wall stops only go where solid backing can take the hit.
Floor Stops Near the Wall
Floor stops sit close to the wall and clear of walking paths.
Overhead Stops for Open Swings
Doors with nothing behind them get an overhead stop on the frame head.
Fire Doors Stay Self-Closing
Rated doors only get holders that release with the fire alarm.
Stop Height Matched to the Floor
Low-rise or high-rise stops are picked to clear the door bottom and sweep.
Honest Fixes
If tightening an existing stop solves the problem, no new hardware goes on the bill.
From our Google reviews
Hear From DMV Managers Who Stopped Patching Drywall
Reviews shared by local business owners.
Google reviews2 weeks ago
Someone smashed the glass on our storefront door around 9 PM. They had a crew out within the hour and boarded it up securely, then came back two days later with the new tempered glass. Professional and fast.
Marcus T.Google review
1 month ago
We manage several office buildings in Northern Virginia and use them for all our door hardware. Closers, panic bars, locks, they’ve handled it all. Always on time and the work is clean.
Denise R.Google review
3 weeks ago
Our restaurant’s front door wouldn’t latch properly and it was a security issue. The tech diagnosed it quickly, replaced the hardware, and we were back open the same day. Fair price too.
Carlos M.Google review
2 months ago
Excellent communication from the first call. They gave an honest quote, showed up when they said they would, and the new glass doors look great. Highly recommend for any Maryland business.
Priya S.Google review
1 month ago
Good work replacing the glass on our shop entrance. The scheduling took a day longer than expected because of a glass delivery, but the crew kept us updated and the result was solid.
James W.Google review
5 days ago
Called after hours for an emergency board-up and a real person answered. The technician arrived quickly and left the site secure and tidy. That kind of service is rare.
Angela B.Google review
2 months ago
They replaced the aluminum storefront doors at our D.C. retail location. The team was careful around customers and finished ahead of schedule. Great craftsmanship.
Robert K.Google review
3 weeks ago
Our automatic door closer kept failing and two other companies couldn’t fix it. These guys found the problem in minutes. Wish I had called them first.
Tanya H.Google review
1 week ago
Transparent pricing, no surprise fees, and quality safety glass. They explained the options and helped us pick what fit our budget. Will use them again.
Michael D.Google review
1 month ago
Very knowledgeable team. They handled a cracked glass panel on our office door quickly and cleaned up completely afterward. Would use again.
Linda F.Google review
Local expertise. Every entrance.
Why DMV Building Managers Pick Us for Door Stops and Holders
Closer and Hinges in the Check
A door that keeps hitting the wall often points to a weak backcheck or worn hinges. Both get a look during the same visit.
Calls Answered Any Hour
Broken holders and doors stuck open after closing still get a response at night.
100% Satisfaction Guaranteed
If a stop shifts or a holder stops working after install, we return at no extra charge.
Every Stop and Holder Style
Wall, floor, overhead, kick-down, and magnetic holders for steel, wood, and glass doors.
Price Before Drilling
The full cost is on paper before a single hole goes into the wall or floor.
Quick and Tidy Installs
Work fits between customer traffic, and drill dust gets vacuumed before we leave.
No Rushed Jobs
Each stop gets measured carefully for the door, its swing, and the surrounding clearance.
Built for Business Buildings
Offices, retail spaces, and warehouses make up our work.
Covering Your Part of the DMV
Petworth, Woodley Park, Kensington, Bowie, Crystal City, and Burke.
Keep business moving
Protect Your Entrance Door Before The Next Windy Day
Overhead Stops Catch the Door Before It Hits the Wall. Get a Free Door Stop Estimate.
A gust of wind can pull the door out of someone’s hand and slam it into the wall. That one swing can bend the closer arm, loosen the hinges, or crack the glass beside the door. Get a free estimate from DMV Commercial Door Repair and find out which stop will keep each exterior door within a safe range.
Before you book
A Few Things
You Might Be Asking.
Door stops & holders. Clear answers.
How much does commercial door stop installation cost?
Wall and floor stops sit at the lower end. Overhead stops and magnetic holders cost more because they need framework or wiring. The number of doors and the type of wall or floor also shape the total. A free on-site estimate lists the price for each door.
Which type of door stop works best for a commercial door?
It depends on what sits behind the door. Floor stops suit most interior doors on hard floors. Wall stops work where solid backing sits behind the lever. Overhead stops fit exterior doors and openings with no wall or safe floor spot nearby.
Can fire doors be held open?
Yes, but only with listed holders that release when the fire alarm sounds. Magnetic holders and closer-holder units are the common choices. Wedges, kick-down holders, and hooks are not allowed on fire doors because they stop the door from closing on its own.
Is there commercial door stop installation near me in the DMV?
Yes, anyone searching for commercial door stop installation near me in D. C., Maryland, or Northern Virginia can schedule a visit with our team. We cover Washington, D. C., Montgomery and Prince George’s counties, Arlington, Alexandria, and Fairfax County. Call us to confirm a specific address.
Why does my door handle keep making holes in the wall?
Either the door has no stop, or the stop sits on hollow drywall with nothing solid behind it. Each hard swing pushes the stop or lever deeper into the wall. A floor stop or a wall stop mounted over solid backing ends the damage.
Do exterior doors need a special type of stop?
Most exterior doors benefit from an overhead stop or a heavy-duty floor stop. Wind can swing an exterior door hard enough to bend the closer arm or tear the hinges. A stop that catches the door before that point protects the whole opening.
Are hinge pin stops good for commercial doors?
Most commercial hardware pros avoid them on heavy doors. A hinge pin stop catches the door right at the hinge, where the force works against the hinge and jamb. Floor, wall, and overhead stops catch the door farther out and spread the load better.
Let’s take a look
Get My Free Stop Estimate
Tell us about the door, the damage, and where you need help.
Door, hardware, and operation checked.
Cost shared before work begins.
Cost shared before work begins.
Across the DMV
D.C. · Maryland · Virginia
Washington, D.C. · Montgomery County · Prince George’s County · Arlington · Alexandria · Fairfax County