Push Force Check
A technician presses the bar the way staff and customers do, feeling for drag and watching the latch spring back into the strike.

D.C. · MARYLAND · VIRGINIA

Round-the-Clock Exit Device Service
Exit hardware that releases on the first push and locks behind the last employee out.
A push bar that sticks halfway, or a latch that never springs back out, turns a rear exit into the easiest way into the building. Staff tends to work around it by wedging the door open for deliveries or leaving the latch held back with a dogging key long after closing. These are the calls DMV Commercial Door Repair answers. Our technicians replace worn latches, return springs, and outside trim, or fit a new exit device when the old one can’t be saved.
What we fix
Back doors and side entrances take hard pushes all day, plus the occasional shoulder from someone carrying boxes. Spraying lubricant into the mechanism or tightening the end cap quiets the problem for a week or two. Meanwhile, the cracked return spring or worn latch bolt inside keeps wearing down until someone replaces it.
Every visit from DMV Commercial Door Repair starts with opening the mechanism case, finding the failed piece, and matching the new part to the device’s make and series. Hardware that is cracked, outdated, or wrong for the opening gets replaced with new commercial exit devices sized to the door. Doors tied to card readers or alarm panels are covered too, from electric latch retraction to delayed egress devices on high-theft exits. Staff get a bar that pushes smoothly, and the door catches its latch on every close.

Take care of the entrance
Rear Entrances Are a Top Target for Business Break-Ins. Book Your Service Today.
A closer look. A clear price.
Each visit starts at the bar and ends with a straight recommendation.

A technician presses the bar the way staff and customers do, feeling for drag and watching the latch spring back into the strike.
Dogging gets locked and released, and the outside lever or key gets tried from the street side.
Every estimate closes with a clear call on whether a part swap or a new device makes more sense.
Installed with care
Panic hardware gets tested at the worst possible moment, when a crowd needs out fast. That moment shapes every repair and install our crew finishes.
Secure from outside.
Ready from inside.
Each bar is adjusted until it opens without a struggle.
Where code calls for panic hardware, bars cover at least half the door’s width.
Rated doors only get hardware carrying a fire exit label.
Strikes get adjusted until the latch seats fully on every close.
An exit we secure always opens from the inside.
A worn spring gets replaced before anyone suggests buying a new device.
From our Google reviews
Reviews shared by local business owners.

Someone smashed the glass on our storefront door around 9 PM. They had a crew out within the hour and boarded it up securely, then came back two days later with the new tempered glass. Professional and fast.

We manage several office buildings in Northern Virginia and use them for all our door hardware. Closers, panic bars, locks, they’ve handled it all. Always on time and the work is clean.

Our restaurant’s front door wouldn’t latch properly and it was a security issue. The tech diagnosed it quickly, replaced the hardware, and we were back open the same day. Fair price too.

Excellent communication from the first call. They gave an honest quote, showed up when they said they would, and the new glass doors look great. Highly recommend for any Maryland business.

Good work replacing the glass on our shop entrance. The scheduling took a day longer than expected because of a glass delivery, but the crew kept us updated and the result was solid.

Called after hours for an emergency board-up and a real person answered. The technician arrived quickly and left the site secure and tidy. That kind of service is rare.

They replaced the aluminum storefront doors at our D.C. retail location. The team was careful around customers and finished ahead of schedule. Great craftsmanship.

Our automatic door closer kept failing and two other companies couldn’t fix it. These guys found the problem in minutes. Wish I had called them first.

Transparent pricing, no surprise fees, and quality safety glass. They explained the options and helped us pick what fit our budget. Will use them again.

Very knowledgeable team. They handled a cracked glass panel on our office door quickly and cleaned up completely afterward. Would use again.
Local expertise. Every entrance.
The closer and frame get looked at too, since either one can keep a good latch from catching.
A back door that won’t lock at 10 p.m. can still get a technician that night.
If the device acts up after our work, a technician returns at no extra charge.
Rim, mortise, narrow stile, alarmed, and electrified devices on hollow metal, wood, or aluminum doors.
Owners see and approve the written price before any work begins.
Work fits around open hours and lunch rushes, and old hardware leaves in our van.
After a forced back door, photos and written notes are ready for the insurance claim.
Our technicians check the fit, operation, and release of every device before finishing the work.
Foggy Bottom, Adams Morgan, Wheaton, Laurel, McLean, and Springfield.
Keep business moving
Before you book
Exit device repair. Clear answers.
A latch or return spring replacement sits at the low end of the range. Fire-rated, alarmed, and mortise devices cost more to repair or replace. Outside trim and strike work add to the total as well. A free on-site estimate puts the exact price in writing before any work starts.
Many times the device is still dogged from earlier in the day. A broken return spring, a worn latch bolt, or a strike that shifted out of line can also stop the latch from catching. A technician can pinpoint the cause during one visit and fix it on the spot in most cases.
Dogging holds the push bar and latch in the retracted position. The door then swings freely without latching during busy open hours. It works with a hex key or a small key cylinder. Fire exit hardware is built without dogging because fire doors must latch every time they close.
Yes, businesses looking for commercial exit device repair near me in D. C., Maryland, or Northern Virginia can book our technicians directly. The service area covers Washington, D. C., Montgomery and Prince George’s counties, Arlington, Alexandria, and Fairfax County. Call us to check a specific address.
Yes, an exit device with electric latch retraction pulls the latch back when a card reader, keypad, or timer sends a signal. The door can stay unlocked during business hours and lock on its own at closing. The push bar still works normally from the inside at all times.
No, the code ties panic hardware to how a space is used. Under the International Building Code, assembly and educational spaces with 50 or more occupants need it, along with high-hazard areas. Many offices and stores still choose exit devices because they hold up well under heavy daily use.
A rim exit device mounts on the face of the door and latches into a strike on the frame. Most single commercial doors use this type. A mortise exit device works with a lock body set into a pocket in the door edge. That design looks cleaner and latches more securely, though it takes more work to install.
Let’s take a look
Tell us about the door, the damage, and where you need help.
Across the DMV
Washington, D.C. · Montgomery County · Prince George’s County · Arlington · Alexandria · Fairfax County